A common phrase which suggests "a marriage will be well-maintained and enjoyable if a partner makes their wife happy first and foremost", may have been the inspiration when Will came to us for an RV Lithium Battery System to run an induction cooker for his wife and his fridge when touring with his 200 Series.
In this instance, Will ordered a customised version of The Lithium Box 200/40 featuring:
200Ah RV Lithium Systems Lithium (LiFePO4) Battery with Cell Balancing and Cell Protection
Victron BMV 712 Bluetooth Battery Meter Display. Read the battery meter from the convenience of your smart phone Displays the battery’s voltage, amps in or out, amp hours consumed, time to go until flat, and actual State of Charge (SOC) as a percentage.
REDARC BCDC 1240D Vehicle 40A DC to DC Charger with Blue 50A Anderson Plug Vehicle Input, protected by cell protection and 40A MPPT Solar Charger with TWO ( 1 x front & 1 x rear) yellow 50A Anderson Plug Input protected by cell protection
Master Battery Switch
Automatic 240A Low Battery State of Charge or Voltage Disconnect of accessory power sockets and Automatic Reconnect once the battery has received adequate charge
Internal Fusing and Output Short Circuit Protection
1 x 175A Anderson Plug to connect a Victron Phoenix Compact 12/1600VA Inverter to run the Induction Cooker
1 x 50A (max) Grey Anderson Plug Output
2 x Anderson Plug for Power Output on the front (16A max each)
2 x Accessory (Cig) Sockets
1 x Engel/Waeco Sockets
1 x Twin 2.1A USB Socket
A Victron Energy 240V, 25A IP65 Battery Charger with connection for 240 volt charging when staying at a caravan park or placing TLB in storage. We pre-programmed the charger with a storage profile specific to our batteries to ensure optimum health.
Measures 470 x 152 x 325mmH
The 200 Series Cruiser is fitted with a classy Custom Installations drawer system which provided the opportunity to mount the Inverter under the wing and TLB on top, nice and neatly situated next to the Clearview drop down fridge slide – The easy slide.
For ease of use, we wired in the Inverter power switch to the existing switch panel on the drawers, and a 240V outlet on the face of the drawers.
For a customised solution to power the way you like to travel, contact us.
Comments